At+Cgerep Data Service Event Reporting - Novatel MT 3050 At Command Reference

AT+CGEREP Data Service Event Reporting

AT+CGEREP
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<mode>
<bfr>
Notes
Data Service Event Reporting
This command enables or disables sending of unsolicited result codes, +CGEV:
XXX from MT to TE in the case of certain events occurring in the MT or the
network.
AT+CGEREP=?
+CGEREP: (0-2),(0,1)
OK
AT+CGEREP=<mode>,<bfr>
OK
AT+CGEREP?
+CGEREP: 0,0
OK
N/A
N/A
N/A
0 = buffer unsolicited result codes in the MT
1 = discard unsolicited result codes when MT-TE link is reserved (e.g. in on-line
data mode); otherwise forward them directly to the TE
2 = buffer unsolicited result codes in the MT when MT-TE link is reserved (e.g. in
on-line data mode) and flush them to the TE when MT-TE link becomes available;
otherwise forward them directly to the TE
0 = MT buffer of unsolicited result codes defined within this command is cleared
when <mode> 1 or 2 is entered
1 = MT buffer of unsolicited result codes defined within this command is flushed
to the TE when <mode> 1 or 2 is entered (OK response shall be given before
flushing the codes)
If parameter <mode> is omitted it is assumed to be the value of the last
command execution or the default value
(0). If parameter <bfr> is omitted it is assumed to be the value of the last
command execution or the default value (0).
- 107 -