At$Obdadn Set Down Accelerometer Threshold - Novatel MT 3050 At Command Reference

AT$OBDADN Set Down Accelerometer
Threshold
AT$OBDADN
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<ALERT>
<THRHLD>
<SET TIME>
<CLR TIME>
Notes
OBD2 Set Down Accelerometer threshold
This command is used to set the 'down' accelerometer threshold.
AT$OBDADN=?
$OBDADN: (1),(0-4000),(1-1000),(1-1000)
OK
AT$OBDADN=<ALERT>,<THRHLD>,<SET TIME>,<CLR TIME>
OK or ERROR
AT$OBDADN?
$OBDADN: <THRLD>,<SET TIME>,<CLR TIME>
N/A
N/A
N/A
Acceleration alert number (must be 1)
Acceleration in milli Gs
0 is the default value and is used to disable that threshold.
Time above threshold to set alert in seconds (default 1)
Time below threshold to clear alert in seconds (default 2)
N/A
- 274 -