At$Gfdbnc Set Geofence Debounce Count - Novatel MT 3050 At Command Reference

AT$GFDBNC Set Geofence Debounce Count
AT$GFDBNC
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<out_cnt>
<in_cnt>
Notes
Set Geofence Debounce Count
This command allows the user to set the number of consecutive geofence
positions required to trigger an 'inside geofence' or 'outside geofence' event. It
prevents a false reading when the device is on the threshold of the geofence.
AT$GFDBNC=?
$GFDBNC: (0-250),(0-250)
OK
AT$GFDBNC=<out_cnt>,<in_cnt>
OK
AT$GFDBNC?
$GFDBNC: <out_cnt>, <in_cnt>
OK
N/A
N/A
Consecutive GPS position reports outside a geofence required to trigger '0'
condition for geofence input event (see $EVENT)
Consecutive GPS position reports inside a geofence required to trigger '1'
condition for geofence input event (see $EVENT)
The GPS reporting interval varies depending on the product. for the MT-Gx and
MTxxxx products, the updates are sent every one second.
- 305 -