At+Cgdcont Define Pdp Context - Novatel MT 3050 At Command Reference

AT+CGDCONT Define PDP Context

AT+CGDCONT
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<cid>
<PDP_type>
<"APN">
<"PDP_addr">
<d_comp>
<d_comp> (if HS 1000)
Define PDP Context
Specifies PDP context parameter values for a PDP context identified by the
(local) context identification parameter, <cid>.
AT+CGDCONT=?
+CGDCONT: (1-6),"IP",,,(0),(0,1)
OK
AT+CGDCONT=<cid>,<PDP_ Type>,<APN>,<PDP_ADDR>,<d_comp>,<h_
comp>
OK
AT+CGDCONT?
+CGDCONT: <cid>,<PDP Type>,<"APN">,<"PDP_ADDR">,<d_comp>,<h_
comp>
OK
N/A
N/A
N/A
PDP Context Identifier a numeric parameter which specifies a particular PDP
context definition. The parameter is local to the TE-MT interface and is used in
other PDP context-related commands. The range of permitted values (minimum
value = 1) is returned by the test form of the command.
"IP"
"Access Point Name"
" Identifies the device in the address space"
0 = off
1 = on
A numeric parameter that controls PDP data compression (applicable for
SNDCP only). Currently AUF IDL does not support PDP data compression, that's
why the supported value is 0. It is an optional parameter. AT parser will ignore
this parameter
- 105 -