At$Obdam Set Any Motion Parameters - Novatel MT 3050 At Command Reference

AT$OBDAM Set Any Motion Parameters

AT$OBDAM
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<enable>
<threshold>
<count>
<holdtime>
Notes
Set Any Motion Parameters
This command allows the user to set the 'any motion' parameters of the
accelerometer. The 'any motion' setting allows users to trigger an event when the
accelerometer senses motion in any axis.
AT$OBDAM=?
$OBDAM: (0-1),(0-255),(0-3),(0-64800)
OK
AT$OBDAM= <enable>,<threshold>,<count>,<holdtime>
OK
AT$OBDAM?
$OBDAM: <enable>,<threshold>,<count>,<holdtime>
N/A
N/A
N/A
0 = Disable the 'any motion' feature
1 = Enable the 'any motion' feature (default)
Accelerometer 'any motion' threshold. This value represents the level of
movement required to be considered 'any motion.' Lower values are more
sensitive to motion. The <threshold> values are raw hardware units ( not mili-G's).
Range: 0 – 255
(Default value = 10)
Accelerometer 'any motion' count
Range: 0 – 3
(Default value = 3)
Number of seconds of no motion before the 'any motion' event is cleared.
Range: 0 – 64800
(Default value = 180)
None yet.
- 277 -