At+Cpin Enter Pin - Novatel MT 3050 At Command Reference

AT+CPIN Enter PIN

AT+CPIN
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<code>
Enter PIN
Set command sends to the ME a password that is necessary before it can be
operated (SIM PIN, SIM PUK, PH-SIM PIN, etc.).
If no PIN request is pending, no action is taken towards ME and an error
message, +CME ERROR, is returned to TE.
If the PIN required is SIM PUK or SIM PUK2, the second pin is required. This
second pin, <newpin>, is issued to replace the old pin in the SIM.
AT+CPIN=?
OK
AT+CPIN=<"pin">,[<"newpin">]
AT+CPIN?
+CPIN: <code>
OK
or
+CME ERROR: <err>
N/A
N/A
N/A
READY = ME is not pendingfor any password
SIM PIN = ME is waiting SIM PIN to be given
SIM PUK = ME is waiting SIM PUK to be given
PH-SIM PIN = ME is waiting phone-to-SIM card password to be
given
PH-FSIM PIN = ME is waiting phone-to-very first SIM card
password to be given
PH-FSIM PUK = ME is waiting phone-to-very first SIM card unblocking password
to be given SIM PIN2 = ME is waiting SIM PIN2 to be given (this <code> is
recommended to be returned only when the last executed
command resulted in PIN2 authentication failure (i.e. +CME
ERROR: 17); if PIN2 is not entered right after the failure, it is
recommended that ME does not block its operation)
- 28 -