At$Wakeup Modem To Server Wakeup/Keep Alive - Novatel MT 3050 At Command Reference

AT$WAKEUP Modem To Server Wakeup/Keep
Alive
AT$WAKEUP
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
Modem to Server Wakeup/Keep Alive
This command allows the user to configure the modem wakeup/keep alive
parameters. These parameters control how the modem initiates contact with its
server friends. Parameters can be selected so that a wakeup message sequence
is executed every time the modem receives a new IP, and/or after a requested
period has passed since the previous wakeup sequence has completed. A
wakeup message sequence consists of sending <max retry> messages to each
server friend in sequence (i.e. server 2 is contacted after all retries for server 1 is
complete) and is complete when each server friend has received <max retry>
messages, or upon receipt of an acknowledge message from a server.
AT$WAKEUP=?
$WAKEUP: (0-2),(0-10080)
OK
AT$WAKEUP=<wakeup mode>,<retry period>
OK
AT$WAKEUP?
$WAKEUP: <wakeup mode>,<retry period>
N/A
N/A
N/A
- 151 -