At$Fotacfg Configure Firmware Upgrade - Novatel MT 3050 At Command Reference

AT$FOTACFG Configure Firmware Upgrade

AT$FOTACFG
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<ftpServerHostname>
<ftpPort>
<ftpUsername>
<ftpPassword>
<ftpMode>
<retries>
Configure Firmware Upgrade
This command allows the user to configure the modem Firmware Over The Air
(FOTA) Server.
AT$FOTACFG=?
$FOTACFG: "host",(0-65535),"username","password",(0,1),(0-20),(0,1),(0,1),(0,1)
OK
AT$FOTACFG=<"ftpServerHostname">,<ftpPort>,<"ftpUsername">,
<"ftpPassword">,<ftpMode>,<retries>,<reportMode>,<upgradeMode>,
<upgradeStatus>
OK
N/A
N/A
N/A
N/A
N/A
Either Fully Qualified Domain Name (FQDN) or a dotted-decimal IP address of the
FTP server. The FQDN is resolved by DNS immediately prior to opening IP
connection to FTP server. The FQDN may be up to a maximum of 63 characters.
Default value: none.
The TCP port number on the FTP server. Port range: 0 – 65535, Default value: 21
FTP login name on the FTP server. The username may be up to a maximum of 31
characters. Default value: none.
The FTP password for the FTP user. The password may be an empty string if the
FTP user does not have a password. The password may be up to a maximum of 31
characters. Default value: none.
The FTP mode to use for data connections. FTP data connections may be active or
passive. Passive mode is generally better to use with FTP servers located behind
firewalls. Values: 0 = active, 1 = passive. Default value: 0 (active mode).
This is the maximum number of FTP file resumes to attempt before giving up on
original AT$FOTAGET command. The range of retries is 0 – 20. Default Value: 0.
- 167 -