At$Obddcl Deceleration Thresholds - Novatel MT 3050 At Command Reference

AT$OBDDCL Deceleration Thresholds

AT$OBDDCL
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<ALERT>
<THRHLD>
<SET TIME>
<CLR TIME>
Notes
Examples
OBD2 Deceleration Thresholds
This command is used to set the three deceleration thresholds.
AT$OBDDCL=?
$OBDDCL: (1-3),(0-4000),(1-1000),(1-1000)
OK
AT$OBDDCL=<ALERT>,<THRHLD>,<SET TIME>,<CLR TIME>
OK
AT$OBDDCL?
$OBDDCL: <THRLD>,<SET TIME>,<CLR TIME><THRLD>,<SET TIME>,<CLR
TIME><THRLD>,<SET TIME>,<CLR TIME>
N/A
N/A
N/A
Deceleration alert number
Deceleration in milli Gs
0 is the default value and is used to disable that threshold.
Time above threshold to set alert in seconds
Time below threshold to clear alert in seconds
- 284 -