AT$GPSFD Restore GPS Filter Defaults
AT$GPSFD
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<sticky>
Notes
Restore GPS Filter Defaults
This command restores GPS filter defaults for the $GPSQUAL, $GPSFLT, and
$GPSRST commands without impacting the rest of the system configuration.
This command is intended to be used after a software upgrade to take
advantage of new filter settings without having to perform a full AT&F.
This command accepts one parameter (a 'sticky' flag). If the sticky flag is set, the
GPS filter defaults will be persistent. If the sticky flag is not set, the GPS filter
defaults will not be maintained past the next modem reset.
AT$GPSFD=?
$GPSFD: (0-1)
OK
AT$GPSFD=<sticky>
OK
N/A
N/A
N/A
N/A
N/A
0 = The GPS modem defaults will not be maintained past the next modem reset.
1 = The GPS modem defaults will be persistent.
- 308 -