At$Gpsrst Set And Query Gps Reset Interval - Novatel MT 3050 At Command Reference

AT$GPSRST Set And Query GPS Reset Interval

AT$GPSRST
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<coldStartInterval>
Set and Query GPS Reset Interval
This command allows the user to specify the duration of a continuous GPS no
lock condition after which the GPS chip will be reset.
The GPS will often take several minutes to get a lock when power has been
cycled to the device. However, if valid RTC time is available, then the lock should
be acquired more quickly. The second parameter allows the user to cut down
the time without a lock before resetting the GPS chip when outside of the cold
start window.
AT$GPSRST=?
$GPSRST: (0-255),(0-255)
OK
AT$GPSRST=<coldStartInterval>,<warmStartInterval>
OK
AT$GPSRST?
$GPSRST: <coldStartInterval>,<warmStartInterval>
<filtCnt>
OK
AT$GPSRST
ERROR
N/A
When RTC time is not valid (year < 2010), this is the time (in tens of minutes) of
GPS outage after which to reset the GPS chip and resume positioning.
- 322 -