At&W Save Current Settings - Novatel MT 3050 At Command Reference

AT&W Save Current Settings
AT&W
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
Notes
Users should avoid sending AT&W immediately before a modem reset. A minimum of a few
seconds should be allowed between issuing the command and a modem reset.
Save Current Settings
This command allows the user to save the current settings in memory.
N/A
N/A
N/A
N/A
N/A
N/A
AT&W
OK
N/A
N/A
To ensure successful completion of the command, do not issue additional
commands until 'OK' is returned.
AT&W does not save commands that are implemented on the aux processor
(OBD and accelerometer commands, essentially any command prefixed with
''OBD''). These settings are only persistent if AT$OBDSAV is sent. If AT$OBDSAV
is not sent, any changes made to OBD or accelerometer commands are
maintained through a reset (AT$RESET), but are lost if the power is cycled.
- 23 -