At$Obdlfl Low Fuel Level Threshold - Novatel MT 3050 At Command Reference

AT$OBDLFL Low Fuel Level Threshold

AT$OBDLFL
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<THRHLD>
<SET TIME>
<CLR TIME>
Notes
Examples
OBD2 Low Fuel Level Threshold
This command is used to set the low fuel level threshold.
AT$OBDLFL=?
$OBDLFL: (0-100),(1-1000),(1-1000)
OK
AT$OBDLFL=<THRHLD>,<SET TIME>,<CLR TIME>
OK
AT$OBDLFL?
$OBDLFL: <THRHLD>,<SET TIME>,<CLR TIME>
N/A
N/A
N/A
Low fuel level threshold in percent
Time below threshold to set alert in seconds
Time above threshold to clear alert in seconds
When the threshold is set to zero the event is disabled.
- 294 -