At+Cgreq Quality Of Service - Novatel MT 3050 At Command Reference

AT+CGREQ Quality Of Service

AT+CGREQ
Command Function
Syntax Query
Response
Write Syntax
Response
Read Syntax
Response
Execute Syntax
Response
Parameter Values
<cid>
<precedence>
<delay>
<reliability>
Quality of Service
The set command specifies a profile for the context identified by the (local)
context identification parameter, <cid>. Since this is the same parameter that is
used in the +CGDCONT and +CGDSCONT commands, the +CGQREQ command
is effectively an extension to these commands. The QoS profile consists of a
number of parameters, each of which may be set to a separate value.
A special form of the set command, +CGQREQ= <cid> causes the requested
profile for context number <cid> to become undefined.
The read command returns the current settings for each defined context.
The test command returns values supported as a compound value. If the MT
supports several PDP types, the parameter value ranges for each PDP type are
returned on a separate line.
+CGQREQ=?
+CGQREQ: <PDP_type>, (list of supported <precedence>s), (list of supported
<delay>s), (list of supported <reliability>s) , (list of supported <peak>s), (list of
supported <mean>s) [<CR><LF>+CGQREQ: <PDP_type>, (list of supported
<precedence>s), (list of supported <delay>s), (list of supported <reliability>s) ,
(list of supported <peak>s), (list of supported <mean>s) [...]]
+CGQREQ=[<cid>[,<precedence >[,<delay>[,<reliability.>[,<peak>
[,<mean>]]]]]]
OK or ERROR
+CGQREQ?
+CGQREQ: <cid>,<precedence >,<delay>,<reliability>,<peak>,<mean>
[<CR><LF>+CGQREQ: <cid>,<precedence >,<delay>,<reliability.>,
<peak>,<mean> [...]]
N/A
N/A
a numeric parameter which specifies a particular PDP context definition (see the
+CGDCONT and +CGDSCONT commands).
a numeric parameter which specifies the precedence class
a numeric parameter which specifies the delay class
a numeric parameter which specifies the reliability class
- 111 -