TCP API Commands
AT$TCPAPI TCP API Control
AT$TCPAPI
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<Status>
<Mgr Task>
<Rec Task>
TCP API Control
This command allows the user to initiate and terminate and query the status of
the TCP API connection. Please note that the TCP API can only be used over the
air.
AT$TCPAPI=?
$TCPAPI: (0-1)
OK
AT$TCPAPI=<Status>
OK
AT$TCPAPI?
$TCPAPI: <Status> (M-<Mgr Task>,R-<Rec Task>,T-<Trans Task>,Idx <Friend
Index>)
N/A
N/A
N/A
TCP API connection status
0=Disabled
1=Enabled
TCP API Manager Task
0 = None
1 = Init
2 = Idle
3 = Connecting
4 = Connected
5 = Disconnecting
TCP API Receive Task
0 = None
- 155 -