AT$EVCID User Defined Incoming Call
Number Event
AT$EVCID
Command Function
Command Functional Novatel Wireless Specific
Group
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response N/A
Parameter Values
<entry>
<mode>
User defined incoming call number event
This command allows the user to define up to 5 separate incoming call number user
input events
AT$EVCID=?
$EVCID: (1-5),(0-2),"<ph_num>"
OK
AT$EVCID=<entry>,<mode>[,<"number">]
OK
AT$EVCID?
$EVCID: <entry>,<mode>,<"number">
N/A
N/A
1-5 = Selects which CID entry to modify
0 = Disable event generation for incoming call number
1 = Enable event generation for incoming call number and suppress ring indication
and respond to network with busy signal.
2 = Enable event generation for incoming call number and do not suppress ring
indication.
- 232 -