Table of Contents
Advertisement
AT$MSGLOGDMP Dump Unsent Messages To
Serial Port
AT$MSGLOGDMP
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<queue>
<format>
Dump Unsent Messages to Serial Port
This command allows the user to dump the contents of the unsent messages to
the serial port. This command is non-destructive in that it does not actually
remove the messages from the queue
AT$MSGLOGDMP=?
$MSGLOGDMP: (0-3),(0-1),(1-83),(0-1)
OK
AT$MSGLOGDMP=<queue>,<format>,<bytes_per_line>,<display_all>
OK
N/A
N/A
N/A
N/A
N/A
N/A
0 = event data that was configured to be sent to a remote server via data service
only
1 = event data that was configured to be sent to a remote server via data service
primarily but also use SMS as backup method if data service is not available
2 = event data that was configured to be sent to a remote server via SMS only
3 = event data that was configured to be sent to a remote server via TCPAPI only
0 = ASCII format (if message contains a byte that is not a printable ASCII
character, it will be displayed as '?'
1 = hex format (Each byte in message is displayed as a two-digit hex character
representing the value of the byte with spaces between each byte. Maximum of
16 bytes per line.)
- 138 -
Advertisement
Table of Contents
