At$Rtctime Real Time Clock Time - Novatel MT 3050 At Command Reference

AT$RTCTIME Real Time Clock Time

AT$RTCTIME
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
< rtc_wkday >
< rtc_year >
<rtc_month>
Real Time Clock Time
This command handles the setting and querying of the RTC time registers.
AT$RTCTIME=?
$RTCTIME: (0-6),(0-99),(1-12),(1-31),(0-23),(0-59),(0-59)
OK
AT$RTCTIME= <rtc_wkday>,<rtc_year>,<rtc_month>,<rtc_day>,<rtc_
hour>,<rtc_min>,<rtc_sec>
OK
AT$RTCTIME?
$RTCTIME: <rtc_wkday>, <rtc_year>, <rtc_month>, <rtc_day>,<rtc_hour>,
<rtc_min>, <rtc_sec>"
OK
N/A
N/A
N/A
Parameters are positional dependent, any parameter may be omitted with the
use of the comma (',') as a place holder on command line. If a parameter is
omitted then the current value in the hardware is used.
Current week day matching time day being set.
The week day values range from 0-6, where;
0 = Sunday
1 = Monday
2 = Tuesday
3 = Wednesday
4 = Thursday
5 = Friday
6 = Saturday
The year to which the time is being set. The RTC supports years 2000-2099. The
data is entered as a two digit value 0-99.
The month to which the time is being set. Values range from 1-12.
- 194 -