At$Obdacl Acceleration Thresholds - Novatel MT 3050 At Command Reference

The backup battery commands only apply to MT 3000 Series devices that contain a backup battery. Do not
attempt to use these commands on devices without backup batteries.

AT$OBDACL Acceleration Thresholds

AT$OBDACL
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<ALERT>
<THRHLD>
<SET TIME>
<CLR TIME>
Notes
Examples
OBD 2 Acceleration Thresholds
This command is used to set the three acceleration thresholds.
AT$OBDACL=?
$OBDACL: (1-3),(0-4000),(1-1000),(1-1000)
OK
AT$OBDACL=<ALERT>,<THRHLD>,<SET TIME>,<CLR TIME>
OK
AT$OBDACL?
$OBDACL: <THRLD>,<SET TIME>,<CLR TIME><THRLD>,<SET TIME>,<CLR
TIME><THRLD>,<SET TIME>,<CLR TIME>
N/A
N/A
N/A
Acceleration alert number
Acceleration in milli Gs.
0 is the default value and is used to disable that threshold.
Time above threshold to set alert in seconds
Time below threshold to clear alert in seconds
- 273 -