AT+CLCK Facility Lock
AT+CLCK
Command
Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response N/A
Unsolicited
Response
Parameter Values
<fac>
Facility Lock
This command is used to lock, unlock or interrogate a ME or a network facility <fac>.
When querying the status of a network service (<mode>=2) the response line for a "not
active" case (<status=0>) should be returned only if service is not active for any <class>.
Is should be possible to abort the command when network facilities are set or
interrogated.
AT+CLCK=?
+CLCK: ("SC","AO","OI","OX","AI","IR","AB","AG","AC","FD",
"PS","PN","PU","PP","PC","PF","FC","FM","MU","MM","AL")
OK
AT+CLCK=<fac>, <mode> [,<passwd> [, <class>]]
If <mode><> 2 and command is successful then OK
If <mode>=2 and command is successful then
+CLCK:<status>,[,<class1>[<CR><LF>+CLCK: <status>, class2...]]
OK
N/A
N/A
N/A
N/A
"SC" = (SIM PIN 1)
"AO" = (Barr All Outgoing Calls)
"OI" = (Barr Outgoing International Calls)
"OX" = (Barr Outgoing International Calls except Home Country)
"AI" = (Barr All Incoming Calls)
"IR" = (Barr Incoming Calls when Roaming outside the Home Country)
"AB" = (All Barring Services)
"AG" = (All Outgoing Barring)
- 52 -