At$Obdees Excessive Engine Speed Thresholds - Novatel MT 3050 At Command Reference

AT$OBDEES Excessive Engine Speed
Thresholds
AT$OBDEES
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<ALERT>
<THRHLD>
<SET TIME>
<CLR TIME>
Notes
Examples
OBD2 Excessive Engine Speed Thresholds
This command is used to set the three excessive engine speed thresholds.
AT$OBDEES=?
$OBDEES: (1-3),(0-65535),(1-1000),(1-1000)
OK
AT$OBDEES=<ALERT>,<THRHLD>,<SET TIME>,<CLR TIME>
OK
AT$OBDEES?
$OBDEES: <THRLD>,<SET TIME>,<CLR TIME><THRLD>,<SET TIME>,<CLR
TIME><THRLD>,<SET TIME>,<CLR TIME>
N/A
N/A
N/A
Excessive engine speed alert number
Engine speed in ¼ RPM
0 is the default setting and is used to disable that threshold
Time above threshold to set alert in seconds
Time below threshold to clear alert in seconds
- 287 -