At+Cbst Select Bearer Service Type - Novatel MT 3050 At Command Reference

AT+CBST Select Bearer Service Type

AT+CBST
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response N/A
Parameter Values
<baud rate>
<name>
Select Bearer Service Type
This command is used to select the bearer service with data rate and the connection
element to be used when data calls are originated.
AT+CBST=?
+CBST: (0-7, 12, 14, 65, 66, 68, 70, 71,75), (0-1), (0-3)
AT+CBST=<baud rate>,<name>,<ce>
OK/ERROR
AT+CBST?
+CBST: 7,0,1
N/A
N/A
0 = autobauding (automatic selection of the speed; this setting is possible in case of
3.1 kHz modem and non-transparent service)
1= 300 bps (V.21)
2 = 1200 bps (V.22)
3 = 1200/75 bps (V.23)
4 = 2400 bps (V.22bis)
5 = 2400 bps (V.26ter)
6 = 4800 bps (V.32) 9600 bps (V.32)
12 = 9600 bps (V.34)
14 = 14400 bps (V.32) 300 bps (V.110)
66 = 1200 bps (V.110)
68 = 2400 bps (V.110 or X.31 flag stuffing)
70 = 4800 bps (V.110 or X.31 flag stuffing)
71 = 9600 bps (V.110 or X.31 flag stuffing)
75 = 14400 bps (V.110 or X.31 flag stuffing)
0 = data circuit asynchronous (UDI or3.1 kHz modem)
- 203 -