At+Cops Operator Selection - Novatel MT 3050 At Command Reference

AT+COPS Operator Selection

AT+COPS
Command
Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response N/A
Unsolicited
Response
Parameter Values
<mode>
Operator Selection
Write command forces an attempt to select and register the GSM network operator.
<mode> is used to select whether the selection is done automatically by the ME or is
forced by this command to operator <oper> (it shall be given in format <format>). If the
selected operator is not available, no other operator shall be selected (except <mode> =
4). The selected operator name format shall apply to further read commands (+COPS?)
also. <mode>=2 forces an attempt to deregister from the network. The selected mode
affects to all further registration (e.g. after <mode>=2, ME shall be unregistered until
<mode>=0 or 1 is selected).
Read command returns the current mode and the currently selected operator. If no
operator is selected, <format> and <oper> are omitted.
Test command returns a list of quadruplets, each representing an operator present in the
network. Quadruplet consists of an integer indicating the availability of the operator
<stat>, long and short alphanumeric format of the name of the operator, and numeric
format representation of the operator. Any of the formats may be unavailable and will
then be an empty field (,,). The list of operators comes in the following order: Home
network, networks referenced in SIM, and other networks.
AT+COPS=?
+COPS: (2, " ", " ", "31022"), (3, " "," ", "310380")
OK
AT+COPS=<mode>
[, <format> [, oper>]]
OK or +CME ERROR: <err>
AT+COPS?
+COPS: 0
OK
N/A
N/A
0 = automatic (<oper> field is ignored)
- 61 -