At$Excdec Excessive Deceleration - Novatel MT 3050 At Command Reference

AT$EXCDEC Excessive Deceleration

AT$EXCDEC
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<THRESH>
<SET TIME>
<CLR TIME>
Notes
Excessive Deceleration
This command is used to configure the excessive deceleration event. Input event
199.
AT$EXCDEC=?
$EXCDEC: (0-200),(1-20),(1-20)
OK
AT$EXCDEC=<THRESH>,<SET TIME >,<CLR TIME >
OK
AT$EXCDEC?
$EXCDEC: <THRESH>,<SET TIME >,<CLR TIME>
OK
N/A
N/A
N/A
0 – Excessive Deceleration Event Disabled
1-200 – Deceleration Threshold (in Knots * 10)
1-20 – Number of seconds above threshold to set event
1-20 – Number of seconds below threshold to clear event
A value of 100 for threshold equals 10 knots per second.
This function uses GPS to determine deceleration.
- 303 -