At+Colp Connected Line Identification - Novatel MT 3050 At Command Reference

AT+COLP Connected Line Identification

AT+COLP
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<n>
<m>
Notes
Connected Line Identification Presentation
This command is enables a calling subscriber to get the Connected Line Identity
(COL) of the called party after setting up a mobile originated call. The command
enables or disables the presentation of the COL at the TE. It has no effect on the
execution of the supplementary service COLR in the network.
AT+COLP=?
+COLP: (0,1)
OK
AT+COLP= [<n>]
OK
AT+COLP?
+COLP: <n>,<m>
OK
N/A
N/A
N/A
(parameter sets/shows the result code presentation status in the TA)
0 = disable
1 = enable
(parameter shows the subscriber COLP)
0 = COLP not enabled
1 = COLP enabled
2 = Unknown (e.g. no network, etc.)
N/A
- 213 -