At$Obdspd Vehicle Speed Thresholds - Novatel MT 3050 At Command Reference

AT$OBDSPD Vehicle Speed Thresholds

AT$OBDSPD
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<ALERT>
<THRHLD>
<SET TIME>
<CLR THRLD>
Notes
Examples
OBD2 Vehicle Speed Thresholds
This command is used to set the three excessive vehicle speed thresholds.
AT$OBDSPD=?
$OBDSPD: (1-3),(0-255),(0-1000),(0-255)
OK
AT$OBDSPD=<ALERT>,<THRHLD>,<SET TIME>,<CLR THRLD>
OK
AT$OBDSPD?
$OBDSPD: <THRLD>,<SET TIME>,<CLR THRHLD><THRLD>,<SET TIME>,<CLR
THRHLD><THRLD>,<SET TIME>,<CLR THRHLD>
N/A
N/A
N/A
Excessive vehicle speed alert number
Vehicle speed in KPH
Time above threshold to set alert in seconds
Vehicle speed in KPH
When the set and clear thresholds are set to zero the event is disabled.
- 296 -