At$Atexec Execute At Command File - Novatel MT 3050 At Command Reference

AT$ATEXEC Execute AT Command File

AT$ATEXEC
Command Function
Syntax Query
Response
Write Syntax
Response
Read Syntax
Response
Execute Syntax
Response
Unsolicited Response
Parameter Values
<"FILENAME">
<OPTION>
Execute AT Command File
This command is used to execute an AT command file that is stored in FFS.
AT$ATEXEC =?
$ATEXEC: "filename", (0-2)
OK
AT$ATEXEC =<"FILENAME >,<OPTION>
OK
AT$ATEXEC?
$ATEXEC: <"FILENAME">,<STATUS>
OK
N/A
N/A
The modem returns two responses after the command to run the script has
been issued. The first response is an immediate acknowledgement of the
command, either OK (if the command was entered correctly) or ERROR (if the
command was not entered correctly). After the script has completed, the
modem returns an Unsolicited Result Code (URC) indicating either success or
the reason for the error.
The following URCs may be returned:
$ATEXEC OK
$ATEXEC FAIL
$ATEXEC FILE OPEN ERROR
$ATEXEC FILE READ ERROR
$ATEXEC AT CMD ERROR, Line n (Where n is the line number of the first error in
the script file)
$ATEXEC BUSY ERROR
Name of file to execute
Maximum length is 15 characters.
AT command execution option
- 173 -