At$Obdidl Idle Speed Threshold - Novatel MT 3050 At Command Reference

AT$OBDIDL Idle Speed Threshold

AT$OBDIDL
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<THRHLD>
<SET TIME>
<CLR TIME>
Notes
Examples
OBD2 Idle Speed Threshold
This command is used to set the idle speed threshold.
AT$OBDIDL=?
$OBDIDL: (0-255),(1-1000),(1-1000)
OK
AT$OBDIDL=<THRHLD>,<SET TIME>,<CLR TIME>
OK
AT$OBDIDL?
$OBDIDL: <THRHLD>,<SET TIME>,<CLR TIME>
N/A
N/A
N/A
Idle speed in KPH
Time above threshold to set alert in seconds
Time below threshold to clear alert in seconds
When the threshold is set to zero the event is disabled.
- 290 -