At$Evtest Generate Test Input Event - Novatel MT 3050 At Command Reference

AT$EVTEST Generate Test Input Event

AT$EVTEST
Command Function
Syntax Query
Syntax
Write Syntax
Write Response
Read Syntax
Read Response
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
<event>
<state>
Notes
Generate Test Input Event
This command allows the user to generate any input event. This is useful for
testing the user event table.
N/A
N/A
N/A
N/A
N/A
N/A
AT$EVTEST=<event>,<state>
OK
N/A
input event number
input event test state
User variable values are automatically saved to flash and explicit user intervention
to save the values is not required. AT&W does not save user variables to flash. At
the end of each event engine cycle, if any user variable has been changed the
user variable values are automatically saved to flash at that time (so you can
make multiple changes to user variables inside event groups without worrying
about writing to flash too often). Changing a user variable via $EVTEST also
causes the user variable values to be saved to flash.
- 241 -