YASKAWA VIPA System MICRO M13-CCF0000 Manual page 217

VIPA System MICRO
Event ID
0xE300
0xE310
0xE400
0xE401
0xE402
0xE403
0xE404
0xE405
0xE410
HB400 | CPU | M13-CCF0000 | en | 16-47
Description
0x64: VSFC
0x66: VSFB
ZInfo3 : BstNr
Internal flash writing finished (Copy Ram2Rom)
Internal flash writing finished (reload after battery failure)
FSC card was plugged
DatID : FeatureSet Trialtime in minutes
ZInfo1 : Memory extension in kB
ZInfo2 : FeatureSet PROFIBUS
ZInfo2 : FeatureSet field bus
ZInfo2 : FeatureSet motion
ZInfo2 : Reserved
FSC card was removed
DatID : FeatureSet Trialtime in minutes
ZInfo1 : Memory extension in kB
ZInfo2 : FeatureSet PROFIBUS
ZInfo2 : FeatureSet field bus
ZInfo2 : FeatureSet motion
ZInfo2 : Reserved
ZInfo3 : Source of the FSC
0: CPU
1: Card
A configured functionality is not activated
ZInfo1 : FCS ErrorCode
1: The PROFIBUS functionality is disabled The interface acts further as MPI interface
2: The EtherCAT functionality is not enabled
3: The number of configured axis is not enabled
FSC can not be activated in this CPU
ZInfo1 : Memory extension in kB
ZInfo2 : FeatureSet PROFIBUS
ZInfo2 : FeatureSet field bus
ZInfo2 : FeatureSet motion
ZInfo2 : Reserved
FeatureSet deleted due to CRC error
DatID : Not relevant to the user
The trial time of a feature set or MMC has expired
DatID : Not relevant to the user
A CPU feature set was activated
System specific event IDs
217