Demounting; Demounting Cpu - YASKAWA VIPA System MICRO M13-CCF0000 Manual

Basics and mounting
Demounting > Demounting CPU

2.6 Demounting

2.6.1 Demounting CPU

Remove connector
22
2. Push the screwdriver backwards:
ð The connector is unlocked and can be removed.
CAUTION!
Via wrong operation such as pressing, the screwdriver down-
ward the release lever may be damaged.
3. Plug connector:
The connector is plugged by plugging it directly into the release lever.
By means of a screwdriver there is the possibility to remove the connectors e.g. for
module exchange with a fix wiring. For this each connector has indentations for unlocking
at the top. Unlocking takes place by the following proceeding:
1. Power-off your system.
2. Remove connector:
Insert your screwdriver from above into one of the indentations.
3. Push the screwdriver backwards:
ð The connector is unlocked and can be removed.
CAUTION!
Via wrong operation such as pressing, the screwdriver down-
ward the connector may be damaged!
4. In this way, remove all plugged connectors on the CPU.
VIPA System MICRO
HB400 | CPU | M13-CCF0000 | en | 16-47