YASKAWA VIPA System MICRO M13-CCF0000 Manual page 153

VIPA System MICRO
UDTs
FB Designation
UDT 65* TCON_PAR
UDT 66* TCON_ADR
*) More information about the usage of these blocks may also be found in the manual "SPEED7 Operation List" from VIPA
FBs
FB Designation
FB 63* TSEND
FB 64* TRCV
FB 65* TCON
FB 66* TDISCON
FB 67 TUSEND
FB 68 TURCV
*) More information about the usage of these blocks may also be found in the manual "SPEED7 Operation List" from VIPA
Connection-oriented pro-
tocols
HB400 | CPU | M13-CCF0000 | en | 16-47
Connection-oriented protocols:
TCP native as per RFC 793, ISO
on TCP as per RFC 1006
Data structure for assigning connec-
tion parameters
Connection-oriented protocols:
TCP native as per RFC 793, ISO
on TCP as per RFC 1006
Sending data
Receiving data
Establishing a connection
Terminating a connection
n Connection-oriented protocols establish a (logical) connection to the communication
partner before data transmission is started.
n And if necessary they terminate the connection after the data transfer was finished.
n Connection-oriented protocols are used for data transmission when reliable, guaran-
teed delivery is of particular importance.
n In general, many logical connections can exist on one physical line.
Deployment PG/OP communication - productive
Configure Open Communication
Connectionless protocol: UDP
according to RFC 768
Data structure for assigning parameters
for the local communications access point
Data structure for assigning addressing
parameters for the remote partner
.
Connectionless protocol: UDP
according to RFC 768
Configuring the local communications
access point
Closing the local communications access
point
Sending data
Receiving data
.
153