YASKAWA VIPA System MICRO M13-CCF0000 Manual page 23

VIPA System MICRO
CPU replacement (stand-
alone)
HB400 | CPU | M13-CCF0000 | en | 16-47
If more modules are connected to the CPU
on page 24. If no other modules are connected to the CPU, the CPU is replaces
according to the following proceeding:
1. Pull the locking levers of the CPU outwards until these engage audible.
2. Remove the CPU with a rotation upwards from the mounting rail.
3. Pull the locking levers of the CPU outwards until these engage audible.
CAUTION!
It is not allowed to mount the module sideways on the mounting rail,
as otherwise the module may be damaged!
4. Plug the CPU from the top onto the mounting rail and turn the periphery module
downward until it rests on the mounting rail.
Basics and mounting
Demounting > Demounting CPU
Ä 'Option: CPU replacement in a system'
23