YASKAWA VIPA System MICRO M13-CCF0000 Manual page 230

System specific event IDs
Event ID
0xEA99
0xEAA0
0xEAB0
230
Description
DatID : Not relevant to the user
ZInfo3 : Slot
Error at file reading via SBUS
ZInfo3 : Slot
PK : Not relevant to the user
DatID : Not relevant to the user
ZInfo2 : File version of the SBUS module (if not equal to 0)
ZInfo1 : File version at MMC/SD (if not equal 0)
Internal error - Please contact the hotline!
Link mode not valid
ZInfo1 : Diagnostics address of the master
ZInfo2 : Current connection mode
0x01: 10Mbit half-duplex
0x02: 10Mbit full-duplex
0x03: 100Mbit half-duplex
0x04: 100Mbit full-duplex
0x05: Link mode undefined
0x06: Auto Negotiation
OB : Current operation mode
0: Configuration in operation mode RUN
1: STOP (update)
2: STOP (overall reset)
3: STOP (own initialization)
4: STOP (internal)
5: Start-up (cold start)
6: Start-up (cold restart/warm start)
7: Start-up (restart)
8: RUN
9: RUN (redundant operation)
10: HALT
11: COUPLING
12: UPDATING
13: DEFECTIVE
14: Troubleshooting
15: Without power
0xFD: Process image enabled in STOP
0xFE: Watchdog
0xFF: Not set
VIPA System MICRO
HB400 | CPU | M13-CCF0000 | en | 16-47