Deployment I/O Periphery; Overview; Analog Input; Digital Input - YASKAWA VIPA System MICRO M13-CCF0000 Manual

Configuration with VIPA SPEED7 Studio
Deployment I/O periphery > Digital input
Parametrization during
runtime

9.6 Deployment I/O periphery

9.6.1 Overview

Project engineering and
parametrization

9.6.2 Analog input

9.6.2.1 Overview
9.6.2.2 Parametrization in SPEED7 Studio
9.6.2.2.1 'I/O addresses'
Sub module Input address
AI2 800
802
9.6.2.2.2 'Parameter'
'Filtering channel 0/1'

9.6.3 Digital input

9.6.3.1 Overview
188
By using the SFCs 55, 56 and 57 you may alter and transfer parameters for wanted
modules during runtime. For this you have to store the module specific parameters in so
called "record sets". More detailed information about the structure of the record sets is to
find in the according module description.
On this CPU the connectors for digital respectively analog signal and Technological
n
functions are combined in a one casing.
n Die Project engineering happens in the VIPA SPEED7 Studio as CPU M13-CCF0000.
n For parametrization of the digital I/O periphery and the technological functions the
corresponding sub modules of the CPUM13-CCF0000 are to be used.
n The controlling of the operating modes of the technological functions happens by
means of handling blocks of the user program.
n 2xUx12Bit (0 ... 10V)
n Sub module 'AI2'
Ä Chapter 5.3 'Analog input' on page 87
n
Access
WORD
WORD
The analog input part has a filter integrated. The parametrization of the filter happens via
the parameter 'Filter channel 0/1' . The default value of the filter is 1000ms. The following
values can be entered:
n 2ms: no filter
n 100ms: small filter
n 1000ms: medium filter
10000ms: maximum filter
n
n 16xDC 24V
n Sub module 'DI16/DO12'
Ä Chapter 5.4 'Digital input' on page 90
n
Assignment
Analog input channel 0 (X4)
Analog input channel 1 (X4)
HB400 | CPU | M13-CCF0000 | en | 16-47
VIPA System MICRO