YASKAWA VIPA System MICRO M13-CCF0000 Manual page 103

VIPA System MICRO
Hardware interrupt
Hardware gate opening
Hardware gate closing
On reaching comparator
Overflow
Underflow
Max. frequency
Counting signals/HW gate
Latch
HB400 | CPU | M13-CCF0000 | en | 16-47
Description
Hardware interrupt by edge 0-1 exclusively at HW gate
channel 3
n enabled: Process interrupt by edge 0-1 exclusively at
HW gate channel 3 with open SW gate
n disabled: no hardware interrupt
Hardware interrupt by edge 1-0 exclusively at HW gate
channel 3
n enabled: Process interrupt by edge 1-0 exclusively at
HW gate channel 3 with open SW gate
n disabled: no hardware interrupt
Hardware interrupt on reaching comparator
n enabled: Hardware interrupt when comparator is trig-
gered, can be configured via 'Characteristics of the
output'
n disabled: no hardware interrupt
Hardware interrupt overflow
n enabled: Hardware interrupt on overflow the upper
counter limit
n disabled: no hardware interrupt
Hardware interrupt on underrun
n enabled: Hardware interrupt on underflow the lower
counter limit
n disabled: no hardware interrupt
Description
Specify the max. frequency for track A/pulse, track B/direc-
tion and HW gate
Range of values: 1, 2, 5, 10, 30, 60kHz
Specify the max. frequency for the latch signal
Range of values: 1, 2, 5, 10, 30, 60kHz
Deployment I/O periphery
Counting > Parametrization
Assignment
disabled
disabled
disabled
disabled
disabled
Assignment
60kHz
10kHz
103