4.1.4
Multiple Spanning Tree Protocol
By default MSTP is enabled globally on the VSP 9000 and is enabled on all ports. To enable fast
convergence when a device is connected to the VSP 9000, the 10 GbE ports will be configured for edge
mode.
To enable Admin Edge mode on ports 3/1-3/9 and 6/1-6/9 using the ACLI:
1
Enter the configuration context for the Gigabit ports3/1-3/9 and 6/1-6/9:
VSP9000:1(config)# interface gigabitEthernet 3/1-3/9,6/1-6/9
2
Configure the ports for MSTP Edge Mode:
VSP9000:1(config-if)# spanning-tree mstp edge-port true
To enable Admin Edge mode on ports 3/1-3/9 and 6/1-6/9 using the edm:
1
Select Configuration >VLAN>Spanning Tree>MSTP > MSTI Port. Toggle the AdminEdgeStatus
for the ports to true then click Apply:
Dec 2010
VSP 9000 with Coraid EtherDrive SRX-Series
Storage Appliances TCG
avaya.com
17