Wacker Neuson Telehandler TH412 Operator's Manual page 89

Fastening the seat belt
3 2
Fig. 28
BA TH412 * 06/2017 * 4512_4-1_Steuerstand_en.fm
1
1. Sit down on the operator seat with your back fully
touching the backrest.
2. Press unlocking lever 1 at the belt reel and put the seat
belt over your hips.
- Seat belt must not be twisted.
3. Insert buckle latch 2 into buckle 3, and release
unlocking lever 1 at the belt reel.
➥ The seat belt is locked.
Releasing the seat belt
1. Press the red button on the buckle.
➥ The seat belt is released.
2. Press unlocking lever 1 at the belt reel.
➥ The belt is reeled up.
Putting into operation 4
4-15