Wacker Neuson Telehandler TH412 Operator's Manual page 126

4 Putting into operation
Battery master switch
NOTICE
Risk of technical damage.
► Cover the opening with the protective cap to prevent
humidity from penetrating into the switch.
► Never operate the battery master switch under load.
► Do not insert the starting key unless the battery master
switch is operated.
► Do not operate the battery master switch unless the
starting key is removed.
The complete electrical system can quickly separated
from the battery in an emergency by means of the battery
master switch. Switch off the battery overnight to avoid
unloading the battery or to prevent other possible
damage. The battery master switch can also be removed
as an additional antitheft protection.
4-52
Operating the battery master switch
B
Fig. 41
The battery master switch is located in position B on the
control stand.
• Turn the battery master switch to the left.
➥ The battery is disconnected from the electrical
system.
• Turn the battery master switch to the right.
➥ The battery is connected to the electrical system.
BA TH412 * 06/2017 * 4512_4-5_Motor_starten_en.fm