2 Safety
Machine operation
•
Start and operate the vehicle only with the seat belt
fastened and only from the place provided for this.
•
Put the vehicle into operation only if visibility is suffi-
cient (have another person guide you if necessary).
•
Operation on slopes:
- Travel/work only uphill or downhill.
- Avoid machine travel across a slope, observe the
machine's permissible inclination (and of the trailer if
necessary).
- Keep loads on the uphill side of the vehicle and as
close as possible to it.
- Keep attachments/work equipment close to the
ground.
•
Adapt the travel speed to the circumstances (for
example, the ground conditions, weather conditions).
•
There is increased danger during backward vehicle
travel. Persons in the blind spot of the machine cannot
be seen by the operator.
- Ensure that nobody is in the danger zone when you
change the travel direction.
•
Never get on a moving vehicle and never jump off the
vehicle.
2-8
Machine travel on public roads/sites
•
The specific national driving license is required.
•
Observe the national regulations (for example, the
road traffic regulations) during machine travel on
public roads/sites.
•
Ensure that the vehicle is in compliance with the
national regulations.
•
In order not to blind other motorists, using the existing
work lights during vehicle travel on public roads/site is
prohibited.
•
When crossing for example, underpasses, bridges,
tunnels, ensure that the clearance height and width is
sufficient.
•
The attachment fitted onto the machine must be
certified for travel on public roads/sites (see for
example, the registration documents).
BA TH412 * 06/2017 * 4512_2-1_Sicherheit_en.fm
Need help?
Do you have a question about the Telehandler TH412 and is the answer not in the manual?
Questions and answers