Brief Description Of The Machine - Wacker Neuson Telehandler TH412 Operator's Manual

3 Introduction
3.2

Brief description of the machine

Main components of machine
• Sturdy steel sheet chassis
• Yanmar three-cylinder in-line engine; rubber mounted;
Water-cooled
• ROPS/FOPS tested cabin
- ROPS is the abbreviation for "Roll Over Protective
Structure"
- FOPS is the abbreviation for "Falling Object
Protective Structure"
• Exhaust emissions according to Directive 2004/26/EC
• Drive via progressively adjustable hydraulic system
• Maximum speed 20 km/h (28 km/h option)
• Hydraulic power steering with emergency steering
features (4 wheel steering)
• Front and rear planetary axles, rear axle with oscil-
lation
• Service brake
• Telescopic loader unit
3-4
General
The machine is a self-propelled work machine according
to German road traffic regulations. Observe the legal
regulations of your country.
Refer to chapter "Designated use" on page 8
different applications the machine can be used for.
The machine consists of the machine chassis, drive and
axles. The machine chassis contains all drive and control
units forming part of the standard equipment.
BA TH412 * 06/2017 * 4512_3-1_Einleitung_en.fm
for the