Wacker Neuson Telehandler TH412 Operator's Manual page 171

WARNING
Accident hazard due to damaged attachments
Damaged attachments can have negative effects on the
use of the machine.
► Do not put damaged attachments into operation.
► Before starting work, always check the attachments for
damage, correct locking and firm installation.
► Never work with a damaged attachment mount or lock.
► Uncouple attachments before working on them.
BA TH412 * 06/2017 * 4512_5-10_Anbaugeraete_en.fm
Information
Use only attachments authorized by the manufacturer of
the machine. The manufacturer of the machine shall not
be liable for damage, etc., if unauthorized attachments
are used.
Avoid overloading the machine. When raising heavy
loads, do not use buckets that are too big.
Contact an authorized service center if new hydraulic
lines have to be installed for an attachment. Only an
authorized service center is allowed to install new
hydraulic hoses.
Different high-pressure hoses are used. Pay attention to
the DIN specification on the hose or fittings when ordering
spare parts.
Observe the safety instructions for exchanging
attachments.
Operation 5
5-45