Wacker Neuson Telehandler TH412 Operator's Manual page 125

Stopping the engine
1. Lower the loader unit fully to the ground.
2. Apply the parking brake.
3. Let the engine run at idling speed for about 3 minutes
4. Stop the engine.
➥ Turn the starting key to position 0.
5. Remove the starting key.
BA TH412 * 06/2017 * 4512_4-5_Motor_starten_en.fm
NOTICE
Stopping the engine after running it under full load can
cause damage.
► Let the engine run at idling speed for about 3 minutes
so that the temperature can stabilize before stopping
the engine.
NOTICE
Immediately starting the engine after stopping it can
damage the starter.
► Wait at least 10 seconds before starting again.
Putting into operation 4
4-51