Lights/Signaling System - Wacker Neuson Telehandler TH412 Operator's Manual

5.6

Lights/signaling system

Working lights
WARNING
Accident hazard due to blinded motorists!
During machine travel on public roads, the working lights
can blind other motorists. This can cause serious injury or
death.
► Always switch off the working lights during machine
travel on public roads.
► Pay attention to national regulations on construction
site lighting.
The machine is equipped with front and rear working
lights.
The working lights are operated with switch 42 in Rocker
switch panel 2.
BA TH412 * 06/2017 * 4512_5-6_Beleuchtung_en.fm
Operation
Operating the working lights
Fig. 49
• Move the rocker switch 42 to position I.
➥ The front working lights are switched on.
• Move the rocker switch 42 to position II.
➥ The front and rear working lights are switched on.
• Press switch 42 to position 0.
➥ The front and rear working lights are switched off.
0
I
II
42
Operation 5
5-17