Wacker Neuson Telehandler TH412 Operator's Manual page 213

Comfort operation of hydraulic connections on loader unit
For this function, the vehicle is equipped with another
control lever for the mast.
This function allows you to change over the operation of
the hydraulic connections to control lever 4. Control lever
4 does not need to be released to operate the hydraulic
connections.
This function is operated with button 36 on the control
lever 4.
• Press button 36:
➥ The function "Tilt in" operates the hydraulic
connection on the left (with the button pressed).
➥ The function "Tilt out" operates the hydraulic
connection on the right (with the button pressed).
• Release button 36:
➥ The function "Tilt in" tilts in the attachment.
➥ The function "Tilt out" tilts out the attachment.
BA TH412 * 06/2017 * 4512_5-13_2_Opt_Hydr_en.fm
36
2
Fig. 105
Operation 5
5-87