Wacker Neuson Telehandler TH412 Operator's Manual page 297

Removing the engine air filter
1. Remove the fasteners on the cover.
➥ Remove the cover.
2. Pull out main engine air filter H.
The safety engine air filter S is not removed.
3. Check the intake line between the engine air filter and
the engine.
- Check for leaks
- Check for tightness
4. Clean the main engine air filter H by knocking it gently
and blowing compressed air from inside toward
outside.
5. Replace the main engine air filter H if it is very dirty.
Information
Install a new or cleaned main filter element in the reverse
order.
BA TH412 * 06/2017 * 4512_7-10_Luftfilter_en.fm
S
H
Fig. 149
Maintenance 7
7-43