Wacker Neuson Telehandler TH412 Operator's Manual page 116

4 Putting into operation
Preparations before performing machine travel on
public roads
1. Secure the attachment.
- Ensue that the bucket is empty and lowered to the
transport position.
- Install a front-edge protection on the bucket.
- Secure other attachments in compliance with the
regulations on machine travel on public roads.
2. Check the light system and the function of the rotating
beacon if necessary.
3. Switch off the working lights.
4. Set all control levers to the zero position.
5. Switch on the lock for the loader unit control levers.
6. Fasten your seat belt.
7. Start machine travel ensuring safety.
Information
Before starting machine travel, ensure that the machine
complies with the relevant local regulations and that it has
a valid operation license/registration.
4-42
What to do if the machine tips over
WARNING
Crushing hazard due to tipping over of machine!
A tipping vehicle can cause serious injury or death.
► Keep the loader unit lowered during machine travel.
► Adapt the travel speed to the prevailing conditions.
► Adapt the driving speed to the material loaded.
► Pay attention to persons and obstacles.
► Pay attention to the machine's tilting limit.
► Reduce travel speed before performing downhill
machine travel.
► Always fasten your seat belt.
► Ensure that no parts of the body protrude outside the
vehicle.
► Carefully steer the machine if the loader unit is raised.
► Do not exceed the permissible payloads.
BA TH412 * 06/2017 * 4512_4-4_Vorbereitung_en.fm