Wacker Neuson Telehandler TH412 Operator's Manual page 140

5 Operation
Securing the vehicle
• Park the machine on firm, level and dry ground.
• Lower the loader unit.
• Apply the parking brake.
• Stop the engine.
• Set all switches and control levers to the zero position.
• Release the pressure in the hydraulic system.
• Secure the machine with a wheel chock.
• Remove dirt from the machine.
• Perform a visual check for leaks.
- Hydraulic system
- Cooling system
- Fuel system
• Perform a visual check for machine damage, in
particular of the tires, attachments and attachment
locks.
5-14
• Add diesel fuel.
• Check all fluid levels, add fluid if necessary.
• Secure the machine against unauthorized use:
- Remove the starting key.
- Operate and remove the battery master switch.
- Close the restraining bars.
- Close the cabin windows.
- Close the door, filler cap and engine cover.
Information
The instructions mentioned before apply to stopping and
parking the machine after daily operation, transporting the
machine and all maintenance, inspection and repair work.
BA TH412 * 06/2017 * 4512_5-4_Fahren_en.fm