Table of Contents
Advertisement
7.20 Maintenance of options
Central lubrication system
Repair work
Repair work on the central lubrication system may only be
performed by authorized service centers!
Filling up the central lubrication system
Fig. 167
BA TH412 * 06/2017 * 4512_7-20_Optionen_en.fm
Maintenance
1
NOTICE
Vehicle damage if lubrication points are not lubricated.
If lubricant escapes at position 1 on the central lubrication
system, one or more lubrication points will not be
lubricated.
► Get in touch with an authorized service center in this
case.
NOTICE
Damage to central lubrication system due to wrong multi-
purpose grease.
► In order to avoid damage to the central lubrication
system or lubrication points, use only commercially
available multipurpose grease.
The central lubrication system is filled via conical grease
zerks or a fill coupling with a manual or pneumatic grease
gun.
Maintenance 7
7-71
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Telehandler TH412 and is the answer not in the manual?
Questions and answers