Wacker Neuson Telehandler TH412 Operator's Manual page 285

Water separator maintenance
1
Fig. 140
1. Place a container under water separator 1
2. Remove the drain plug from the filter.
➥ The collected water now drains.
3. Firmly re-tighten the drain plug.
4. Bleed the fuel system.
BA TH412 * 06/2017 * 4512_7-7_Kraftstoffsystem_en.fm
Bleeding the fuel system
Fig. 141
(Fig. 140). 1. Add fuel to the fuel tank.
2. Turn the starting key to position I so that the electric
fuel-feed pump works.
3. Wait one minute.
➥ The system bleeds itself automatically.
4. The engine is then ready to be started.
Maintenance 7
0
I
II
III
7-31